The Best Wet Tile Saw Under $300 In 2020 and Buying Guide

If you are looking at remodeling your kitchen backsplash or perhaps your bathroom shower, you are most likely going to use tiles. Tiles are easy to install. The trickiest part of installing tiles is cutting them to the right sizes. Luckily, you can use one the best wet tile saw under $300.

A wet tile saw is an electric table saw used for cutting stone and tile. It comes with a water outlet that sprays water over the material you are cutting.

The continuous flow of water reduces dust and debris emitted by the material being cut. It also helps keeps the tile cool to prevent it from cracking.

Using this tool is the only way you can professionally cut tiles.

More...

Best Wet Tile Saw Under $300 Comparison Table

Product Name

Rating

Price

SKIL 3540-02 7-Inch Wet Tile Saw

4.4/5

SKIL 3550-02 7-Inch Wet Tile Saw with

HydroLock Water

Containment System

4.2/5

QEP 22650Q 650XT 3/4 HP 120-volt Tile Saw for Wet Cutting

of Ceramic and

Porcelain Tile

(Pack of 1)

3.9/5

Leegol Electric 7-Inch Wet Tile Saw -

Portable Wet Cutting Porcelain Tile Cutter Table Saw with Water System

3.8/5

Top 5 Best Wet Tile Saw under $300 In 2020 and Reviews

SKIL 3540-02 7-Inch Wet Tile Saw

The 7-inch SKIL 3540-02 Wet Tile Saw is electric and corded. It is equipped with diamond coated blades. It can cut tiles through 1 inch at 240 angle and 1 3/8 inch at 900 angle. It is 17.7 pounds and is 18 x 14.5 x 7.8 inches.

This wet tile saw comes with a 4.2 amp motor with a no load rotation per minute (RPM) of 3600. Its powerful motor allows easy cutting through tiles, stones, and masonry. It comes with a CULus certification

The SKIL 3540-02 Wet Tile Saw comes with rust and corrosion-resistant stainless steel table and an adjustable rip fence to ensure the cut tile is always of the correct measurements and angles. It has bevels that can cut at 0-45 degrees so you can cut materials in different styles.

Features

  • It is equipped with a 7-inch diamond-coated blade to ensure great cuts.
  • It comes with a rotating bevel that can cut tiles from 0 degrees to a 4- degree angle for a wide range of cutting options.
  • It features an adjustable rip fence and a miter gauge so you can make different cuts with precise measurements.
  • It comes with a blade cooling water reservoir to keep the blade cool and dust and debris to a minimum. It also helps prevent overheating.
  • It comes with a corrosive-resistant stainless steel top

PROS

  • Can cut glass, ceramic and stone
  • Produces clean and precise cuts
  • Portable and lightweight
  • Easy to set-up
  • Durable and long-lasting

CONS

  • Does not come with a removable water tray
  • Can only cut up tiles up to 12” x 12”

The SKIL 3540-02 Wet Tile Saw is ideal for do-it-yourself enthusiasts who need to make quick and precise cuts for kitchens and bathrooms.


SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

The 7-inch SKIL 3550-02 Wet Tile Saw features the unique HydroLock System that splashes water only at a minimum. This saves you time because you can cut the tiles in the bathroom or kitchen where they are going to be installed.

This 120 volts corded and electric wet tile saw features a diamond-rimmed blade ensuring even and efficient cutting. It is equipped with a rust and corrosion-resistant aluminum table top with a sliding side extension to support up to 18” x 18” tiles.

Features

  • Weights 24 pounds and measures 22 x 18 x 8.5 inches
  • Equipped with a HydroLock Water Containment System that keeps water close to the blade.
  • Equipped with a diamond-coated blade for precise straight and miter cuts.
  • Can make bevel cuts for 0, 22.5, and 45 degrees.
  • It comes with a sliding side extension increasing the tabletop size.
  • Produces cleaner cuts with minimal water spillage
  • Comes with a rip capacity of 24 inches
  • Has a no load speed of 3600 RPM

PROS

  • Unique Hydro lock water containment
  • Sliding side extensions
  • Can also cut glass
  • Can make straight, bevel, and miter cuts
  • Less water splashing
  • Easy to assemble
  • Compact and portable

CONS

  • Difficult to adjust fence guide
  • Aluminum table tends to drift while in use

The SKIL 3550-02 Wet Tile Saw is ideal for small cutting jobs. It is inexpensive and can cut through most tiles with standard sizes.


QEP 22650Q 650XT 3/4 HP 120-volt Tile Saw for Wet Cutting of Ceramic and Porcelain Tile

The QEP 22650Q 650XT Wet Tile Saw is equipped with a 120-volt ¾ HP motor generating a cutting power of 3600 RPM, powerful enough to smoothly cut marble, stone, ceramic, and porcelain tiles.

It comes with a water recirculation system and reservoir keeping the working area clean due to minimal water splashes.

This wet tile saw comes with a 15.7 x 20.1 x 9.9 inch dimension and an 8-inch table extension. It features a flat stainless steel table design with rubber foot pads to keep it stable while in use and can tilt for 22.5 and 45-degree miter cuts.

Its 7-inch continuous rim diamond blade comes with a cutting depth of up to 1.25 inches

Features

  • Powerful 3/4 HP motor with 3,600 RPM
  • Comes with a water recirculation system and reservoir to keep water sprays to a minimum
  • Features a stainless steel table that tilts to accommodate 22.5 and 45-degree miter
  • Boasts of a flat table design to allows rips and diagonal cuts
  • Comes with rubber footpads for stability
  • Comes with an 8-inch extension table to accommodate large size tiles.
  • Can cut through tile, granite, stone, and masonry.

PROS

  • The water recirculation system and reservoir keeps working area clean
  • 8-inch extension table can be attached on either left or right side
  • Table tilts to 22.5 and 45 degrees allowing miter cuts
  • Adjustable angle can be locked ensuring précised cuts

CONS

  • Not so powerful motor
  • Inferior maximum cutting depth

The QEP 22650Q 650XT Wet Tile Saw is reasonably priced. It is a good choice if you are on a budget. 

While ideal for DIY projects, it can also be useful to countertop professionals, tile workers, landscapers, and bricklayers.


Leegol Electric 7-Inch Wet Tile Saw - Portable Wet Cutting Porcelain Tile Cutter Table Saw with Water System

The 7-Inch Leegol Electric Wet Tile Saw comes with a 15-3/4” × 16-1/2” table dimension. It is equipped with a 120V 60Hz induction motor with up-to 3,550 RPM and a 7-inch diamond blade allowing you to work with all types of tile and masonry.

This wet tile saw has an adjustable rip fence and miter guide to ensure precise straight and angled cuts. It diamond-coated blade produces smooth cuts. Bevel cuts ranging from 0 up to 45-degrees are possible allowing it to make various types of cuts.

Features

  • 120V/60Hz powerful induction motor with up-to 3,550 RPM
  • Water cooling system to prevent blade from overheating and for a cleaner work area
  • Adjustable rip fence and miter gauge for precise cutting
  • Chrome-plated table with Impact-resistant tub

PROS

  • Power motor equipped with thermal protector
  • Rust-resistant chrome-plated table
  • Accommodates bevel cuts from 0 up to 45 degrees
  • Lightweight and portable
  • Produces accurate cuts
  • Easy to set-up

CONS

  • Thin and low quality blade
  • Difficult to empty and refill water reservoir

The water reservoir of the Leegol Electric Wet Tile Saw keeps the blade cool preventing overheating. It also and minimizes the emission of dust and debris for a cleaner work area.


Ryobi 7-inch Overhead Wet Tile Saw

The Ryobi Overhead Wet Tile Saw is the most powerful model in the Ryobi tile saw line. It is equipped with a 1-3/4 HP engine powerful enough to cut through tiles, pavers, and other materials.

It features an overhead design to ensure quality and a variety of cuts.

Features

  • Features an overhead design for accurate and professional cuts.
  • It weighs 2.76 pounds and comes with a 28.7 x 9.9 x 18.2 inch dimension
  • It comes with an AC/DC power source.
  • It can cut up to 18” x 18” tiles

PROS

  • AC/DC power source
  • Highly affordable
  • Best tile saw Ryobi

CONS

  • Too lightweight
  • Does not include a water pump

The Ryobi Overhead Wet Tile Saw has a water basin that traps dust and debris. It then filters the water to produce recycled clean water. 

The set includes the wet tile saw, blade, hose, and instruction manual.


How to Use Wet Tile Saw?

A wet tile saw can look intimidating but surprisingly, it is easy to use. When used correctly and safely, it can make cutting tile to the right size precise and quick.

  • Place the wet tile saw in a stable place.
  • Fill the water tray.
  • Mark the cut you desire on the tile.
  • Adjust the fence until the blade is aligned with the marks on the tile.
  • Press the guard on the blade and turn on the wet tile saw.
  • Allow the blade to cut the tile at full speed.
  • Turn off the saw and allow it to get to a full stop before removing the pieces of tile.

Before cutting the tile, make sure water is properly spraying to the blade. Never force the tool to go faster because it will chip or break the tile.

Conclusion

A wet tile saw is an indispensable tool if you are into remodeling your kitchen or bathroom. It allows you to easily cut tiles in the right sizes with precision.

The SKIL 3540-02 Wet Tile Saw is the best wet tile saw under $300. It cuts with precision and produces smooth-edged tiles in the right sizes. It comes with a corrosive-resistant stainless steel top and a diamond-coated blade.

SKIL 3540-02 7-Inch Wet Tile Saw*
  • Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
  • Adjustable rip fence with miter gauge for accurate straight and miter cuts
  • Blade cooling water reservoir to keep blade cool while minimizing dust and debris
  • Bevel cuts tile from 0 to 45 degrees. Cut Material: Stone/Masonry
  • Cross Cut Capacity: 7.75-inch Diagonal Cut Capacity: 7.25-inch

It is lightweight, portable, and gets the job done right.

Leave a Comment